Akai DPS12 Operator's Manual download pdf (Page 145)

133

Chapter 13: Using the effects

ROTARY SPEAKER (I)

This effect simulates rotary speakers. Use external MIDI Control Change messages or the function key on the

DPS12 to switch between two rotation speeds (Rate1/Rate2).

When the DPS12 receives a specified Control Change message, is selected if the value falls between 0 and

63, and is selected if the value falls between 64 and 127. Pressing the [F6] key will toggle

between and .

Parameter Setting range Function

1 Rate1 0.1Hz – 10Hz Adjusts the rotation speed (Rate1) of the speakers.

2 Rate2 0.1Hz – 10Hz Adjusts the rotation speed (Rate2) of the speakers.

3 Accel 0.1sec – 10sec Adjusts the time (duration) taken for switching from Rate 1 to Rate 2.

4 Init R1/R2 Sets the initial rotation speed (Rate1/Rate2).

5 MIDI ch 1 – 16 Selects a MIDI channel that receives Control Change messages.

6 Ctrl No. 0 – 127 Sets a Control Change number to be received.

➸

NOTE :

To avoid possible confusion, it is recommended that you select a different MIDI receive channel for

Control Change messages to control mix parameters (see page 116) and for Control Change messages for this

type of effect.

AUTO PAN (I)

This auto pan effect enables you to adjust the rotation and depth of rotation.

LFO

autopan

Parameter Setting range Function

1 Rate 0.1Hz – 10.0Hz Adjusts the speed of panning.

2 Mode Pan A common auto pan.

L>R Simulates a sound source that rotates counter-

clockwise and is listened to from in front.

R>L Simulates a sound source that rotates clockwise

and is listened to from in front.

3 Width 0 – 127 Adjusts the panning width.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 155 156

No comments

Akai DPS12 Operator's Manual Page 145