Akai DPS12 Operator's Manual download pdf (Page 117)

105

Chapter 11: Using a disk

2. Press the [F4] key.

The SELECT DISK window appears.

Example: A drive with the SCSI ID number 3 is selected as the current drive.

3. Press the [F5] key.

The device with becomes the current drive, and the DPS12 returns to the DISK SETUP screen.

➸

NOTES :

• When the current drive is changed, the first Project in the Project list stored in the new current drive is

automatically recalled.

• If you select a drive that does not have the indication, the DPS12 displays an error.

Viewing the drive information

You may view the type, manufacturer, used space, and available space of the connected drive. Follow the steps

below.

1. While the DISK SETUP screen is displayed, move the cursor to the SCSI ID number of the drive whose

data you wish to review.

➸

NOTE :

You cannot view the information of a drive that is not connected.

2. Press the [F1] key.

The DISK INFORMATION window appears. This window is only for display purposes. You cannot change

any parameters.

The following information is included in this window.

1 = (device name)

This field indicates the type of the drive.

2 = (manufacturer)

This field indicates the name of the drive manufacturer.

3 (version number)

This field indicates the version number of the drive.

4 = (used space) (available space)

These fields indicate the amount of used and available space.

3. Press the [F2] key to close the window.

The DPS12 returns to the DISK SETUP screen.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 155 156

No comments

Akai DPS12 Operator's Manual Page 117