Akai DPS12 Operator's Manual download pdf (Page 58)

Chapter 3: Transport/Locate operation

4. Press the [F4] key to set the select field 2 to .

5. Press the [ ] key.

The data between the IN point and the OUT point is repeatedly played.

If you start playing back from a position before the OUT point, the playback continues up to the OUT point,

then returns to the IN point.

If you start playing back from a position after the OUT point, the IN point is located, then playback starts.

Using the [IN] and [OUT] keys to play data between the [IN] point and the

[OUT] point

You can use the [IN] key and [OUT] key to directly enter the IN/OUT points or to play data between the IN/OUT

points. This is useful when you wish to check the position of the auto punch in/out points or a range to be edited.

1. Make sure that the transport section of the DPS12 is stopped.

2. Press the [IN] key or the [OUT] key.

The IN/OUT Points window appears, enabling you to set the IN/OUT points.

This window provides you with the following information.

1 ............................ This is a time field that indicates the time of the IN point.

2 ......................... This is a time field that indicates the time of the OUT point.

3 .................... This field indicates the time (duration) between the IN and OUT points.

✐

TIP :

You can move the cursor to the IN/OUT time field and change the IN/OUT point. (As you change

the point, the value of the field changes.)

3. Press the [F5] key.

The range between the IN point and the OUT point is played once.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 155 156

No comments

Akai DPS12 Operator's Manual Page 58