Akai DPS12 Operator's Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
33
Chapter 2: Recording on the DPS12
Undo level = 2 or higher
When the undo level is set to 2 or higher, the corresponding number of takes are stored on the disk. Press the
[UNDO] key and specify the number of operations you wish to be able to return to.
1. Right after recording or editing is complete, press the [UNDO] key.
The UNDO window appears, in which you may specify the number of operations you wish to undo.
2. Turn the [JOG] dial to enter the number of undo operations.
For example, if you wish to return to the fourth previous status, enter “4.
3. Press the [F5] key.
The DPS12 returns to the previous status you specified, and the LED above the [UNDO] key lights up.
4. Press the [UNDO] key again to cancel the undo operation.
The UNDO window appears again and you can set the number of undo operations. At this time, setting the
field to “0” and pressing the [F5] key will restore the status obtained before the
undo operation, and the LED will turn off (Redo). However, if you have made mad a new recording or edit
after the undo operation, the take that was cancelled by the first undo operation will be discarded.
Undo level = 5
Take 3, 4, 5, and 6 data
are discarded.
[UNDO] key
Number of steps: 0
New recording
Returns to the fourth
previous status.
[UNDO] key
Number of steps: 4
Take 6
Take 5
Take 4
Take 3
Take 2
Take 1
Take 6
Take 5
Take 4
Take 3
Take 2
Take 1
Take 6
Take 5
Take 4
Take 3
Take 2
Take 1
[UNDO] key
Number of steps: 2
Returns to the second
previous status.
Returns to the
previous status.
Take 6
Take 5
Take 4
Take 3
Take 2
Take 1
Take 7
Take 2
Take 1
Take in the disk to be used
in the undo operation
Take #
Take #
Current take
NOTES :
Remember that the higher the undo level, the greater the data that must be stored on the disk, thus
reducing available recording time.
If you set the undo level to 0, pressing the
[UNDO]
key will not activate the Undo function.
Punch In/Out
The Punch In/Out function enables you to re-record only a specified region on an already-recorded track. The
DPS12 offers a “Manual Punch In/Out function” that uses the transport keys and a foot switch, and an Auto
Punch In/Out function” that automatically performs the punch in/out operation at specified positions. In this
example, we will modify part of the bass guitar performance recorded on track 3, using the Auto Punch In/Out
function. First, you need to specify and store the punch in point (IN point) and the punch out point (OUT point).
1. Press the [ ] key to play back the song from the beginning.
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 155 156

Comments to this Manuals

No comments