Akai DPS12 Operator's Manual Page 104

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 103
92
Chapter 9: Control Panel
SAMPLING RATE
You can select a sampling rate and digital clock source for the DPS12.
A
B
You can choose a sampling rate of 48kHz, 44.1kHz, or 32kHz, and select a digital clock in this Control Panel. The
following parameters are available.
1 (sampling rate)
This field enables you to select a sampling rate for the DPS12 operation. Use the [CURSOR] key to move the
cursor to this field, and turn the [JOG] dial to select one of the following three sampling rates.
This sampling rate provides the highest tonal quality, but the available recording time is the shortest. This
rate is used by many DAT recorders.
This standard rate is generally used on CDs and MDs.
Tonal quality is slightly lower, but available recording time is the longest. You can select this option if tonal
quality is not critical.
NOTE :
When the digital input signal is used, match the sampling rate to that of an external device.
2
This field enables you to select whether the DPS12 operates in reference to the internal clock or to an external
digital clock. Use the [CURSOR] key to move the cursor to this field, then turn the [JOG] dial to toggle
between these two options.
(internal clock)
The DPS12 references the internal clock. Select this option when the digital input is not used.
(external clock)
The DPS12 synchronizes the digital clock information derived from the digital input signal.
NOTE :
The digital input signal can be used while is set to . However, as the
input signal is converted to synchronize to the internal clock of the DPS12, the tonal quality may be
changed. In such a case, set the to and match the setting of to that of
the digital input signal.
BEAT MAP
You can set a time signature for a Project.
B
C
A
D
If you selected for the time counter format, or if you are going to synchronize an external
device to the Song Position Pointer and MIDI clock transmitted from the DPS12, you need to set time signa-
tures for the Project. (If the time signature does not match that of the actual song and you try to play back from
the middle of the song, the time value indicated on the time counter and the playback position of the MIDI
Page view 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 155 156

Comments to this Manuals

No comments