Akai DPS12 Operator's Manual download pdf (Page 106)

Chapter 9: Control Panel

FOOT SWITCH

You can select a function for a connected foot switch.

In this Control Panel, you can select a function for a foot switch connected to the FOOT SW jack on the rear

panel. Use the [CURSOR] key to move the cursor to the field, and turn the [JOG] dial to select one of

the following options.

• ...................... This option is used to perform the Punch In/Out operation.

• Others ( , , etc.) ....... The foot switch operates in the same way as when you press the corresponding

key on the top panel.

MIDI (Selecting a function of the MIDI OUT/THRU jack)

You can set a function for the MIDI OUT/THRU jack.

You may select whether the MIDI OUT/THRU jack is used as a MIDI OUT jack or a MIDI THRU jack. Use the

[CURSOR] key to move the cursor to the field, and turn the [JOG] dial to select one of the following

options.

• ......................................... The MIDI OUT/THRU jack functions as a MIDI THRU jack. The signal

received at the MIDI IN jack will be output as is, and no signal inside the

DPS12 will be output.

• ........................................... The MIDI OUT/THRU jack functions as a MIDI OUT jack.

➸

NOTE :

If you use the DPS12 as a sync master device to send MTC or MIDI clock to an external device,

you need to set this parameter to .

LCD CONTRAST

You can adjust the contrast of the LCD display.

You can adjust the contrast of the LCD display according to your environment. Use the [CURSOR] key to move

the cursor to the field, and turn the [JOG] dial to set the contrast in the range of 0 to 127.

✐

TIP :

You can also change the contrast by holding down the

[

]

key on the top panel and turning the

[JOG]

dial. You can use this method while another screen is displayed.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 155 156

No comments

Akai DPS12 Operator's Manual Page 106