Akai DPS12 Operator's Manual download pdf (Page 69)

Chapter 5: Assigning Input Signals and Virtual Tracks

3. To name a virtual track, move the cursor to the character field of the virtual track you wish to name,

then press the [NUMBER/NAME] key.

An underline appears at the top of the character field in which you can enter a name.

4. Use the [JOG] dial or the keys on the top panel to enter a name for this virtual track.

Refer to page 18, 19 for information on entering characters.

After entering characters, press the [NUMBER/NAME] key to confirm the name.

➸

NOTES :

• When the DPS12 is set to default, virtual tracks 1–12 are assigned to physical tracks 1–12.

• You cannot assign a single virtual track to multiple physical tracks. For example, if virtual track 1 has

already been assigned to physical track 1, you cannot assign virtual track 1 to another physical track. If you

wish to assign virtual track 1 to another physical track, first assign another virtual track to physical track 1.

TRACK ERASE function

You may erase the contents of a whole track selected.

1. While the ASSIGN VIRTUAL TRACK screen is displayed, move the cursor to the virtual track you want

to erase and press the [F6] key.

The following window appears.

2. Press the [F5] key.

The whole contents of the selected track will be erased. Press the [F2] key to cancel the operation.

CAUTION :

Once the track data is erased, it cannot be recovered (No UNDO). Use extra caution when

you use this TRACK ERASE function.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 155 156

No comments

Akai DPS12 Operator's Manual Page 69