Akai S1000 Series Operator's Manual download pdf (Page 225)

Page 213

Chapter 11: MIDI Function

MIDI Input Filter

Selecting option 3 from the MIDI key menu presents the MIDI

Input Filter screen, which allows specific types of MIDI events to be

either received or ignored by the MPC3000:

===== Sound Generator Input Filter =====

MIDI volume:RECEIVE MIDI vol now:127

Prog change:IGNORE

======= Sequencer Input Filter =========

Event:NOTES

Pass event?:YES Min change:5

Velocity mode:NORMAL Fixed veloc: 64

========================================

There are two sections, the Sound Generator Input Filter and the

Sequencer Input Filter. The fields are:

The Sound Generator Input Filter section:

• The MIDI volume field:

This choice field has two options: RECEIVE and IGNORE. If set to

RECEIVE, incoming MIDI volume messages (controller 7) will

affect the sound generator’s overall output volume on all outputs. If

set to IGNORE, incoming MIDI volume messages will be ignored.

• The MIDI vol now field:

This field shows the last value of MIDI volume (controller 7)

received. A value of 127 is normal (no attenuation). Any value less

than 127 causes the volume of all outputs to be attenuated from

normal. A VALUE OF ZERO WILL SILENCE ALL AUDIO

OUTPUTS EVEN IF ALL OTHER PARAMETERS ARE SET

CORRECTLY!

• The Prog change field:

This choice field has two options: RECEIVE and IGNORE. If set to

RECEIVE, incoming Program Change messages will automatically

select the active program. (Incoming Program Change messages

above program 24 will select program 24.) If set to IGNORE, incom-

ing Program Change messages will be ignored.

The Sequencer Input Filter section:

• The Event and Pass event? fields:

The Event field is a choice field and can be set to any one of the

following event types:

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 275 276

No comments

Akai S1000 Series Operator's Manual Page 225