Akai S1000 Series Operator's Manual download pdf (Page 149)

Page 136

Chapter 7: The MIXER/EFFECTS Key

The Individual Outputs/Effects Mixer

In addition to the stereo outputs, the MPC3000 provides eight

individual mix outputs and an internal effects generator. The mixer

described in this chapter allows each of the sounds to be assigned to

one of the eight assignable mix outputs or to the internal effects

generator. The level of this assignment is controllable independently

of the stereo mix level.

To access the Individual Outputs/Effects Mixer screen, press the

MIXER/EFFECTS key, then select option 2. The following screen

will appear:

Similar to the Stereo Mix screen, this screen presents a graphic

simulation of a multi-channel mixer, showing a simulated volume

slider and an output assignment for each of the 16 pads in pad bank

A (A01-A16). To view other pad banks, press the PAD BANK key.

To adjust the volume level of the individual outputs or effects for a

particular sound:

1. Press the pad for the sound that you want to adjust; the small

triangle on the screen will move directly above the number of the

selected pad.

2. Rotate the data entry control. As you turn it, the graphic volume

slider will move up or down, indicating that the volume of the

selected sound at the individual outputs (or at the effects genera-

tor input) is being changed. The graphic volume slider can be

thought of as an auxiliary or effects send on a hardware mixing

board.

To change the assignment to the individual outputs or effects for a

particular sound:

1. Press the pad for the sound that you want to adjust; the small

triangle on the screen will move directly above the number of the

selected pad;

2. Press the CURSOR UP key. The small triangle will now point

upwards, toward the number (or E for effects) indicating the

current output assignment.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 275 276

No comments

Akai S1000 Series Operator's Manual Page 149