Akai DR16 pro Operator's Manual download pdf (Page 98)

11: Editing

Page 89

7) Use the CHANNEL ON keys (and the 9-16 key, if necessary) to select the copy source

tracks.

8) Use the TRACK REC (INPUT SELECT) keys (and the 9-16 key, if necessary) to select the

copy destination tracks.

9) Press the STORE/ENT key to execute the copy.

When the DR16pro has completed the copy operation, the message “DONE” will momen-

tarily appear on the display. The LED beside the EDIT key will switch off and the previous

mode will be restored.

Move

The move function is similar to the copy function. The difference is that the move operation deletes

the original section, leaving a gap on the source track. The following diagram illustrates the move

procedure:

Destination insert point

"in" point "out" point

Destination insert point

Source Track

Destination Track

Source and Destination Track

TIME

Source Section

Source

Section

The following steps are similar to “Copy” on page 86, therefore only an outline is provided here.

1) Set the “in” and “out” points to define the move source section.

See “Specifying the “in” Point and “out” Point” on page 26.

2) Locate to the desired position for the destination insert point.

Refer to the “Locate Functions” on page 77.

3) Press the EDIT key to enter Edit Mode.

The EDIT indicator will light up

4) Use the JOG/SHUTTLE control to select the Move function.

You will see a display similar to the following:

ABS

EDIT

5) Press the STORE/ENT key.

6) Use the JOG/SHUTTLE control to specify the number of repeats.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 98