Akai DR16 pro Operator's Manual download pdf (Page 81)

7: Mixer

Page 72

ADAT Digital Output

If you install an optional 8-in/16-out ADAT IB-1616A (or 8-in/8-out ADAT IB-804A) interface board,

you will be able to digitally transfer audio between the DR16pro and an Alesis ADAT machine (or

any other device that includes this interface).

However with the 8-in/8-out ADAT IB-804A, since the Alesis ADAT uses only 8 tracks, you will be

able to transfer only eight audio signals from the DR16pro at any time. In the DR16pro, the ADAT

interface board is fixed to mixer channel outputs 1 through 8. This is fine if you want to transfer

audio from DR16pro mixer channels 1 through 8. If you wish to transfer audio from DR16pro mixer

channels 9 through 16, you must first use the track swap function.

The track swap function enables you to swap mixer channels 1-8 and 9-16. (That is, tracks 1-8 will

be output on channels 9-16, and tracks 9-16 will be output on channels 1-8.)

To Perform the Track Swap Function:

1) Press the SUB-MENU key.

The indicator in the key will flash and the text “SUB-MENU” will appear on the display.

2) Press the MIX(MIXER) key.

You will see a display similar to the following:

ABS

S-M

3) Use the JOG wheel to select “A D A T 1 - 8”.

4) Use the SHUTTLE control to move the cursor to the right field, and rotate the JOG

wheel to select “9 - 16”.

5) Press the STORE/ENT key.

Reset the right field when you wish to digitally transfer audio via channels 1-8.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 81