Akai DR16 pro Operator's Manual download pdf (Page 70)

7: Mixer

Page 61

3) Use the jog wheel to select 8-AES (ADAT).

4) Use the SHUTTLE control to move the cursor to the right field.

5) Use the jog wheel to select either NORM for 1–8 or SWAP for 9–16.

6) Press the STORE/ENT key.

Individual Channel Settings

In order to access individual channel settings for mixing, you need to enter Mix Mode.

Selecting Mix Mode

You set the level, pan, and auxiliary send levels for each input channel using Mix Mode.

1) Press the MIX key to access Mix Mode.

The “LEVEL” function is the first function. You will see a display similar to the following:

ABS

MIX

Setting the Level for Each Channel

1) Rotate the SHUTTLE control to move the cursor to the data item.

The level data will be underlined: . See “Cursor” on page 25.

2) Select the channel(s) you want to modify by pressing the CHANNEL ON keys.

The LEDs over the selected keys light.

Note: You may select more than one channel simultaneously. Press and hold the

CHANNEL ON key for the first channel, then press the subsequent CHANNEL ON keys.

Note: The values between the channels are not relative. Selecting more than one

channel and changing the value of any parameter will set all selected channels to the

same value.

3) Rotate the JOG wheel to change the level value.

As you change the value, not only does the display value change, it is also displayed

graphically using the peak level meters:

The level range is from 000 to 127. The default level is 104.

CHANNEL ON

1/9

2/10 3/11 4/12 5/13 6/14 7/15

8/16

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 70