Akai DR16 pro Operator's Manual download pdf (Page 46)

4: Recording

Page 37

Set the destination tracks:

1) Press the SUB-MENU key.

The indicator in the key will flash and the text “SUB-MENU” will appear on the display.

2) Press the TRACK REC(INPUT SELECT) key for track 15.

The selected TRACK REC key will light up and the display will show the currently selected

input source for that track.

3) Use the JOG/SHUTTLE control to select the left bus signal.

The display will show “RECIN B U S L”.

4) Repeat for track 16.

The display will show “RECIN B U S R”.

Set the source tracks:

1) Using the Mix Mode functions, set the bus send ON for tracks 1 to 14.

See “Selecting the Bus Send” on page 63. While you are in Mix Mode, you would also set the

level, stereo pan position, and send levels for the source tracks. Also see “Individual Channel

Settings” on page 61.

2) Locate to the beginning of your rhythm tracks and record the bounce-down using the

procedures listed in the following sections.

This allows you to execute a completely digital track mix within the DR16pro. The tracks you

bounce-down can then be recorded over (and subsequently mixed down to another stereo

pair) to dramatically increase the effective number of tracks you have available.

Bus Function Notes

Although the bounce-down recording you make can be undone, if you subsequently erase or

record over the source tracks, these cannot be retrieved.

You cannot bounce-down tracks 1 to 16 to a stereo pair — the destination tracks are overwrit-

ten, not merged.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 46