Akai DR16 pro Operator's Manual Page 83

  • Download
  • Add to my manuals
  • Print
  • Page
    / 167
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 82
8: Take Functions
Page 74
Checking a Take
1) Press the TAKE key you want to listen to.
Select from the TAKE keys which have a lit LED. When a TAKE key has been selected, its
LED flashes.
2) Press the Play key to listen to the take.
The DR16pro will play from the current point, switching to the stored take data when it reaches
that location.
Note:
When a TAKE key LED is flashing, you cannot record or edit. The message
TAKE
PLAY”
will appear on the display. You can use any other function.
3) Press the selected TAKE key again.
The LED stops flashing and is left turned on. The DR16pro will play the original recording
when you start another playback.
The following diagram illustrates the checking procedure:
Take1 Original
Original
TAKE1 key flashing
TAKE1 key lit
Committing a Take
Once you have found the “perfect” take, you can replace the original data with the following proce-
dure:
1) Press the COMMIT key.
The red LED beside the COMMIT key flashes and the green LEDs beside the TAKE keys with
data flash.
The message “COMMIT” will appear on the display.
2) Press the TAKE key that contains the “perfect” take.
The LED beside the selected key continues to flash. (The LEDs beside the rejected keys turn
off.) The LED beside the COMMIT key continues to flash.
The message “SURE ??” will appear on the display.
3) Press the STORE/ENT key to confirm.
Your “perfect” take replaces the original data and the selected TAKE key is cleared.
Note:
You can still restore the original material even after you have used the commit proce-
dure by pressing the UNDO key.
Page view 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 166 167

Comments to this Manuals

No comments