Akai DR16 pro Operator's Manual download pdf (Page 95)

11: Editing

Page 86

Copy

The copy function allows you to make multiple copies of a section of audio and re-position it

elsewhere. You can copy material from one section of a track to another, or across tracks.

Note:

The copy operation will overwrite any material that may be present at the destination

insert point.

The following diagram illustrates the copy procedure:

Destination insert point

"in" point "out" point

Destination insert point

Source Track

Destination Track

Source and Destination Track

TIME

Section Copy

Section

Copy

Specifying the Copy Source Section

The start point and end point of the section to be copied are identified using the “in” point and “out”

point respectively.

1) Set the “in” and “out” points to define the copy source section.

See “Specifying the “in” Point and “out” Point” on page 26.

Press the IN key to check the “in” point and press the OUT key to check the “out” point.

To play the specified section, press the IN->OUT key. You can also use the TO, OVER, and

FROM keys to check the “in” and “out” points. See “Special Play Keys” on page 49.

Specifying the Destination Insert Point

1) Locate to the desired position for the destination.

Refer to the “Locate Functions” on page 77.

Tip:

Prior to doing any serious editing, it is a good idea to mark some locate points using

the functions described in the “Locate Functions” on page 77. For example, mark the start

of verses and other relevant sections. Having done so, you will find it much easier to locate

to new positions for copying, moving, and inserting edits.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 95