Akai DR16 pro Operator's Manual download pdf (Page 103)

11: Editing

Page 94

Slip

The slip function moves all the audio forward or backwards from the marked “in” point to the

current position. If the current position is beyond the “in” point, a section of blank audio is inserted

(“Insert” on page 91). However, if the current position is before the “in” point, the material between

the two points is deleted (“Delete” on page 93). The following diagram illustrates the slip function:

Original Track

TIME

"in" point

Current point

Current point after "in" point (insert)

Current point before "in" point (delete)

1) Set the “in” point to mark the start of the audio you want to slip.

See “Specifying the “in” Point and “out” Point” on page 26.

2) Locate to the position to which you want to slip the audio.

Refer to the “Locate Functions” on page 77.

3) Press the EDIT key to enter Edit Mode.

The EDIT indicator will light up

4) Use the JOG/SHUTTLE control to select the Slip function.

You will see a display similar to the following:

ABS

EDIT

5) Use the TRACK REC (INPUT SELECT) keys (and the 9-16 key, if necessary) to select the

tracks you want to slip.

6) Press the STORE/ENT key to slip the tracks.

When the DR16pro has completed the slip operation, the message “DONE” will momentarily

appear on the display. The LED beside the EDIT key will switch off and the previous mode will

be restored.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 103