Akai DR16 pro Operator's Manual download pdf (Page 71)

7: Mixer

Page 62

Setting the Pan

You set the stereo position of each input channel with this Mix Mode function.

1) Rotate the JOG wheel to select the “PAN” function.

2) Rotate the SHUTTLE control to move the cursor to the data item.

The pan data will be underlined: “PAN MID”.

3) Select the channel(s) you want to modify.

4) Rotate the JOG wheel to change the pan position.

The pan position range is from L63 (extreme left) through MID (center) to R63 (extreme right).

The default pan position is MID.

Setting the Send Levels

The DR16pro has two effect send channels, SEND1 and SEND2. When the Auxiliary Send is

set to stereo (see “Selecting Mono or Stereo Send” on page 66), the send channels become

SEND L and SEND R.

You set the stereo send level and stereo pan for each input channel with the following functions.

Setting the stereo send level:

1) Rotate the JOG wheel to select the “SENDS” function.

This function sets the stereo send level for each channel.

2) Rotate the SHUTTLE control to move the cursor to the data item.

The send level data will be underlined: “SENDS 0 0 0”.

3) Select the channel(s) you want to modify.

4) Rotate the JOG wheel to change the level value.

The send level range is from 000 to 127. The default send level is 000.

The send level will also be displayed graphically using the peak level meters.

Stereo send pan position:

1) Rotate the JOG wheel to select the “SDPAN” function.

This function sets the stereo send pan position for each channel.

2) Rotate the SHUTTLE control to move the cursor to the data item.

The send pan position data will be underlined: “SDPAN M I D”.

3) Select the channel(s) you want to modify.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 71