Akai DR16 pro Operator's Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 167
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
10 Time Display
Page 83
Setting Relative Time to Zero
1) Locate the point at which you want to set relative time to zero.
2) Press the RESET key.
Relative time will be selected automatically, and set to 00:00:00:00.0.
To return to absolute time, press the ABS/REL key.
Relative time
Absolute time
RESET key pressed here
Using the RESET key to set the relative time means that you cannot set the relative time at a
point before absolute zero. This is because the relative zero can only be set at a point after the
absolute zero. To set relative time to a point before absolute zero, use the offset function.
Setting a Relative Time Offset
The relative time can also be set by specifying an offset.
1) Press the SUB-MENU key.
The indicator in the key will flash and the text “SUB-MENU” will appear on the display.
2) Press the ABS/REL(OFFSET) key.
You will see a display similar to the following:
3) Use the JOG/Shuttle control, or numeric keypad to specify the offset.
Tip:
You may find it much more efficient to use the numeric keypad to enter a large offset
value.
If you made a mistake, press the RESET key to switch back to the current setting of the offset
value.
4) Press the STORE/ENT key.
Relative time will now be displayed with the specified offset.
The following diagram shows relative time with a 20 second offset:
Relative time
Absolute time
Offset set to 00:00:20:00.0
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 166 167

Comments to this Manuals

No comments