Akai DR16 pro Operator's Manual download pdf (Page 102)

11: Editing

Page 93

4) Use the TRACK REC(INPUT SELECT) keys (and the 9-16 key, if necessary) to select the

tracks you want to erase.

5) Press the STORE/ENT key to erase the tracks.

When the DR16pro has completed the erase operation, the message “DONE” will momen-

tarily appear on the display. The LED beside the EDIT key will switch off and the previous

mode restored.

Delete

The delete function works basically the same as the erase function. However, the delete function

also moves any subsequent material back. The following diagram illustrates the delete procedure:

After delete

Delete Track

TIME

"in" point "out" point

Section

1) Set the “in” and “out” points to define the section to be deleted.

See “Specifying the “in” Point and “out” Point” on page 26.

2) Press the EDIT key to enter Edit Mode.

The EDIT indicator will light up

3) Use the JOG/SHUTTLE control to select the Delete function.

You will see a display similar to the following:

ABS

EDIT

4) Use the TRACK REC (INPUT SELECT) keys (and the 9-16 key, if necessary) to select the

tracks you want to delete.

5) Press the STORE/ENT key to delete the tracks.

When the DR16pro has completed the delete operation, the message “DONE” will momen-

tarily appear on the display. The LED beside the EDIT key will switch off and the previous

mode will be restored.

Note:

When the delete function has completed, the “out” point will be set to the same

location as the “in” point. This will prevent you from unintentionally removing another sec-

tion of material.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 166 167

No comments

Akai DR16 pro Operator's Manual Page 102