Akai DPS16 Operator's Manual download pdf (Page 58)

Chapter 3: Transport/Locate Operation

Deleting a locate point from the locate list

You can delete a locate point stored in the locate list.

1. Press the [GO TO] key while the DPS16 is stopped.

The Locate List window appears, showing the list of stored locate points.

2. Use the [CURSOR] keys or the [JOG] wheel to select a locate point you wish to delete.

3. Press the [F4] (ERASE) key.

The selected locate point is deleted.

✐

TIP :

Press the

[F1]

(CLOSE) key to cancel the delete operation.

Using the Direct Locate function

The Direct Locate function enables you to assign locate points to the [INPUT SELECT] keys and the [TRACK

SELECT]

keys to locate a point immediately.

■ Storing direct locate points

1. Press the [MEMORY] key to capture the desired locate point.

You may store locate points while the DPS16 is recording, playing, or stopped. When you press the

[MEMORY] key, the following Locate Memory window opens, indicating the time value in the Time field at

which you pressed the [MEMORY] key.

2. Press one of the [INPUT SELECT] keys or [TRACK SELECT] keys.

The captured locate point is stored in the specified key as a direct locate point.

✐

TIP :

Press the

[F1]

(CLOSE) key to cancel the operation.

■ Using the stored direct locate points

1. Press the [GO TO] key while the DPS16 is stopped.

The Locate List window appears.

2. Press one of the [INPUT SELECT] keys or the [TRACK SELECT] keys.

The DPS16 locates the point stored in the key you pressed and closes the window.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 197 198

No comments

Akai DPS16 Operator's Manual Page 58