Akai DPS16 Operator's Manual download pdf (Page 157)

145

Chapter 13: Using the Effects

Effect mode screen

In Effect mode, you can set various effect parameters. When you press the [EFFECT] key, the DPS16 enters Effect

mode and displays the following Effect screen. The information on this screen is as follows:

5 621 3 4

1 FX

This field indicates the effect types selected for FX1–4.

2 OnOff

This field enables you to turn the effects for FX1–4 ON or OFF. To change the setting, move the cursor to the

field and rotate the [JOG] wheel.

3 Level

This field enables you to set the level (return level) of signals sent from FX1–4 to the MASTER bus. To

change the setting, move the cursor to the field and rotate the [JOG] wheel.

4 Bus

In this field, you can select whether or not to send the effects signals to the ping-pong bus (BUS). To change

the setting, move the cursor to the field and rotate the [JOG] wheel.

Set this field to “ON” to perform ping-pong recording while applying effects. For more information, refer to

“Applying effects during ping-pong recording” on page 151.

5 [F1] ( EDIT) key

This function key is used to recall the effect parameter screen. For more information on how to edit effect

parameters, refer to “Editing effect parameters” on page 146.

6 [F3] ( SELECT) key

This function key is used to recall the effect type screen. For more information on how to select effect types,

refer to “Selecting effect types” below.

Selecting effect types

1. Move the cursor to the field of the desired effóst (FX1–4) on the Effect screen, and press the [F3]

( SELECT) key.

Effect types are listed in the field on the right. (For the complete list of available effect types, see “Effect types

and parameters” on page 157.)

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 197 198

No comments

Akai DPS16 Operator's Manual Page 157