Akai DPS16 Operator's Manual Page 151

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 150
139
Chapter 12: MIDI Applications
Recording and playing the DPS16’s snapshot on a MIDI sequencer
The DPS16 can transmit and receive a mix snapshot (mix parameter settings) as a series of MIDI Control Change
messages. If you record this snapshot to a MIDI sequencer, you can play back the same mix settings each time you
play the MIDI sequencer.
Follow the steps below to record and play a mix snapshot on a MIDI sequencer.
1. Use MIDI cables to connect the MIDI IN/OUT connectors of the DPS16 to the MIDI OUT/IN
connectors of a MIDI sequencer.
MIDI OUTMIDI OUT
MIDI sequencer
MIDI IN
MIDI IN
Control Change
Control Change
SHUTTLEJOG
DPS16
2. Press the [F3] (MISC.) key in Setup mode and make sure that the MIDI out/thru field on the
screen is set to “OUT”.
If it is set to “ THRU”, move the cursor to the field and set to “ OUT”.
3. Play the DPS16 and create a mix to record as a snapshot.
4. Press the [F3] (GLOBAL) key in Mixer mode.
The following screen appears.
5. Move the cursor to the Tx mixer change field and turn the [JOG] wheel to select a DPS16’s MIDI
channel (1–16) to transmit the Control Change messages.
Page view 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 197 198

Comments to this Manuals

No comments