Akai DPS16 Operator's Manual download pdf (Page 77)

Chapter 6: Mixer Function (Mixer Mode)

■ PAN

You can adjust the stereo image for the channels.

Range: R63 – 0 – L63

✐

TIP :

You can also use the

[PAN]

controls on the top panel to adjust the pan setting for TRACK MIX channels.

➸

NOTE :

When you change the pan setting of the TRACK MIX channels using the

[JOG]

wheel, a square

appears on top of the knob graphic on the screen. This square icon ■ means that the current knob position

does not match the actual pan setting. If you move the corresponding knob on the top panel, the pan

setting will not change until the knob position passes over the current value and the square ■

disappears.

<ex. The knob position of TRACK MIX channel 2 does not match its real value.>

■ BUS

You can turn the channel signals sent to the ping-pong bus on and off.

Range: ON/OFF

You can also use the [INPUT SELECT] keys (INPUT MIX channels) or the [TRACK SELECT] keys (TRACK

MIX channels) to turn the BUS parameter on and off.

➸

NOTE :

The ping-pong bus is a stereo bus, which is different from the master bus, and it is used to mix

audio data on multiple tracks down to one or two tracks (such as for ping-pong recording). See page 81

for information on ping-pong recording.

■ CHANNEL

You can turn channel signals on and off. The off channels are muted and do not output any signal.

Range: ON/OFF

You can also use the [INPUT SELECT] keys (INPUT MIX channels) or the [TRACK SELECT] keys (TRACK

MIX channels) to turn the channels on and off.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 197 198

No comments

Akai DPS16 Operator's Manual Page 77