Akai DPS16 Operator's Manual download pdf (Page 45)

Chapter 2: Recording on the DPS16

Using the Undo/Redo functions

If you are not satisfied with a recording, you can use the Undo function to cancel the previous recording. With the

DPS16’s default setting, the undo level is set to “1”. (The undo level is a parameter that determines the number of

previous operations you can undo. The setting “1” means that you can restore one previous operation.) You can set

this value in a range from 0 to 250, inclusive. (See page 109 for more information.) The operation of the Undo

function is slightly different between undo level 1 and undo level 2 or higher.

Undo level = 1 (default setting)

1. Right after you make a recording, press the [UNDO] key.

One previous take that was recorded or edited is stored on the disk. Pressing the [UNDO] key causes the DPS16

to return to the status prior to the most current recording or edit. The LED above the [UNDO] key will light up.

(Undo)

2. If you wish to cancel the undo operation, press the [UNDO] key again.

Pressing the [UNDO] key again after the undo operation will restore the status obtained before you performed

the undo operation. The LED will turn off. (Redo) However, if you made a new recording or edit after the

undo operation, the take that was canceled by the first undo operation will be discarded.

Take 2

Take 1

Take 2 data is discarded.

Press the

[UNDO] key

(Redo)

(Undo)

New recording

Press the

[UNDO] key

Take 2

Take 1

Take 2

Take 1

Take 3

Take 1

: Take on the disk to be used

in the undo operation.

Take #

: Current take

Undo level = 2 or higher

When the undo level is set to 2 or higher, the corresponding number of takes is stored on the disk. Press the

[UNDO] key and specify the number of operations you wish to be able to return to.

1. Right after recording or editing is complete, press the [UNDO] key.

The Undo/Redo window appears, in which you may specify the number of operations you wish to undo.

2. Turn the [JOG] wheel to enter the number of undo operations.

For example, if you wish to return to the fourth previous status, enter “4”.

3. Press the [F6] ( DO IT) key.

The DPS16 returns to the previous status you specified, and the LED above the [UNDO] key lights up.

4. Press the [UNDO] key again to specify a different number of undo operations.

If you press the [UNDO] key again right after you performed the undo operation, you can specify the number of

undo operations again. However, if you have made a new recording or edit after the undo operation, the take

that was canceled by the first undo operation will be discarded.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 197 198

Comments to this Manuals

No comments

Akai DPS16 Operator's Manual Page 45

Comments to this Manuals

Related products and manuals for Recording Equipment Akai DPS16