Akai DPS16 Operator's Manual Page 184

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 183
172
Chapter 13: Using the Effects
REVERB>BRIGHT HALL
This stereo reverb effect simulates bright reverberations in a hall.
1
2
3
4
5
6
7
8
Parameter Setting range Function
1 Pre-D *1 1ms – 100ms Adjusts the delay time of early reflections.
2 Time *2 0.1sec – 10sec Adjusts the time of attenuation of reverberation.
3 Diff *3 0 – 127 Adjusts the density of reverberation.
4 HFdamp *4 20Hz – 20kHz Sets a frequency at which the higher range of reverberation is cut.
5 Near *5 0 – 127 Adjusts the imaginary distance to the sound source. Lower the value is,
more depth and distance.
6 Width *6 0 – 127 Adjusts the width and spread of the stereo image.
7 Balance +50 – 0 – –50 Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
8 Effect ON/OFF Switches the effect sound output on and off.
REVERB>NON-LINEAR
This special reverb effect (gate reverb) stops reverberation at a specified time.
1
2
3
4
5
6
Parameter Setting range Function
1 Pre-D *1 1ms – 100ms Adjusts the delay time of early reflections.
2 Hold *2 0 – 127 Adjusts the time (duration) until reverberation is stopped.
3 Diff *3 0 – 127 Adjusts the density of reverberation.
4 Width *6 0 – 127 Adjusts the width and spread of the stereo image.
5 Balance +50 – 0 – –50 Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
6 Effect ON/OFF Switches the effect sound output on and off.
Page view 183
1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 197 198

Comments to this Manuals

No comments