Akai DPS16 Operator's Manual Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
120
Chapter 10: Project Management (Project Mode)
Backing up in multiple disks
You may back up one Project into multiple removable disks (such as Jaz, Zip, or MO disks).
Execute the backup operation as usual. Select a removable media device in step 4 above. When the first disk
becomes full, the following window appears.
1. Eject the removable disk and insert a new disk.
2. As was done previously, set the Disk Operation field to FULL FORMAT or FAST ERASE.
3. Press the [F5] (DO IT) key to resume the backup operation.
NOTES :
Press the
[F1]
(CANCEL) key in step 3 to cancel the backup operation. If you cancel the operation, you will
not be able to use the backup data stored on the first disk.
Reload data from disks in the order in which you backed up. (See page 122 for more information on the
reload operation.)
Backing up in an external DAT recorder connected to the DIGITAL jack
You can use an external DAT recorder connected to the DIGITAL jack to back up the Project in a DAT tape.
1. Use a standard digital audio COAXIAL cable to connect the DIGITAL OUT jack on the rear panel of
the DPS16 and the digital input jack on the DAT recorder.
NOTES:
You need to use an optical/coaxial converter if the digital input jacks of the DAT recorder are optical.
The 24-bit Projects cannot be backed up to the DAT recorders.
DPS16
DIGITAL IN
DIGITAL OUT
COAXIAL cable
DAT
SHUTTLEJOG
2. On the Project screen, select the desired Project to back up, then press the [F1] (MORE) key.
3. Press the [F6] (BACKUP) key.
4. Set the Device field to DAT.
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 197 198

Comments to this Manuals

No comments