Akai MPC5000 Specifications download pdf (Page 84)

HD RECORD Mode 70

 Choosing the Track to View

You can select other tracks to view by doing the following:

01. Press and hold the [F5] (TRACK) button.

The screen will change as shown on the right, with a popup to select which track to

view.

02. Select the track you would like to view by scrolling with the

[DATA] wheel.

Editing Hard Disk Tracks

Various edit functions are able to be performed on recorded Hard Disk tracks. To select the tracks to be edited, do the

following.

 Selecting multiple tracks

01. On the TkVIEW page, select the first track to be edited.

02. Select the 'Edit' field

You can navigate to field by using the [CURSOR] buttons.

03. Place a check in this track's 'Edit' field.

04. Repeat steps 1-3 for each track you wish to edit.

05. Using the 'St' and 'End' fields, select the time range you wish to edit.

You can edit this field by scrolling with the [DATA] wheel. If you press the left or right [CURSOR] buttons while holding [SHIFT], you can move the

cursor to higher points within the numeric display to allow for quicker value selection. You can also enter the value directly with the numeric

keypad.

Additionally, the start point can be edited by moving the [Q1] Q-LINK slider.

06. Press the [F6] (EDIT) button.

This will open the AUDIO EDIT page. For information on the individual edit functions, see page 70.

 Fine Editing of a Single Track

01. Select the track you wish to edit.

02. Press the [F5] (ZOOM) button.

When editing from the Zoom page, only the selected track will be edited.

03. Using the 'St' and 'End' fields, select the time range you wish to edit.

You can edit this field by scrolling with the [DATA] wheel. If you press the left or right [CURSOR] buttons while holding [SHIFT], you can move the

cursor to higher points within the numeric display to allow for quicker value selection. You can also enter the value directly with the numeric

keypad.

Additionally, the start point can be edited by moving the [Q1] Q-LINK slider.

04. Press the [F6] (EDIT) button.

This will open the AUDIO EDIT page. For information on the individual edit functions, see page 70.

Individual Edit Functions

When the [F6] (EDIT) button is pressed, the AUDIO EDIT page is opened. This page differs depending on the edit

function selected. The following parameters are shared among all the pages.

Tracks

This displays what tracks are to be edited. This displays the tracks that

were selected on the TKVIEW page.

Edit

This field selects the different edit functions. The different edit functions

are explained individually below.

Start / End

This is the start and end point for the edit function to be applied. This will

default to what was set on the TKVIEW or ZOOM pages, but can be further adjusted here.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 221 222

Comments to this Manuals

No comments

Akai MPC5000 Specifications Page 84

Comments to this Manuals

Related products and manuals for Musical Instruments Akai MPC5000