Akai MPC5000 Specifications Page 99

  • Download
  • Add to my manuals
  • Print
  • Page
    / 222
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 98
85
SUDDEN Button
Normally, the MPC5000 will switch to the next sequence after it plays the current sequence to the end.
However, you can also switch to the next sequence before the MPC5000 finishes playing back the current sequence by
pressing the [F4] (SUDDEN) button.
It is useful for the live performance, where you need to switch to the next phrase at a certain cue.
01. Select the next sequence with the pads, and press the [F4] (SUDDEN) button.
The MPC5000 will switch to the next sequence at the point the button is pressed.
Tip: If you press the pad while holding the [F4] (SUDDEN) button, the MPC5000 will switch to the next sequence at the
point the pad is hit.
HOLD Button
Normally, when the next sequence is selected, the MPC5000 will switch to the next sequence after it finishes playing the
current sequence. If you press the [F5] (HOLD) button, the MPC5000 will keep playing back the current sequence until
you press the [F5] (HOLD) again. It is useful for the live performance, where you wish to change the phrase according
to the response of the audience.
01. Select the next sequence with the pad, and press the [F5] (HOLD) button.
The button will be highlighted and the MPC5000 will keep playing back the current sequence, instead of switching to the next sequence.
If you press the [F5] (HOLD) button again, the Hold function will turn off and the MPC5000 will switch to the next sequence after it finishes playing
back the current sequence.
Tip: If you press the [F4] (SUDDEN) button when the hold function is on, the MPC5000 will switch to the next sequence
right away.
Next Sequence for Next Bar
Changing sequences in NEXT SEQUENCE Mode can be switched at the
beginning of the next bar.
In NEXT SEQUENCE Mode, switch to the next sequence on the next bar
by doing the following:
01. While the MPC is playing, hit the pad corresponding to the
Sequence you would like to switch to.
The Sequence Selected will be indicated in the lower left of the screen as shown to
the right.
02. Press the [F3] (NXTBAR) button.
The [NXTBAR] Button will darken to indicate that it is active. The MPC5000 will change sequences at the top of the next bar.
Page view 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 221 222

Comments to this Manuals

No comments