Akai MPC5000 Specifications download pdf (Page 90)

HD RECORD Mode 76

Mixer Automation

The MPC5000 can record information such as Level and Pan changes and Track Mute events so that they will automate

during sequence play back.

01. In the HD RECORD mode, press the [F3] (TRKMIX) button.

02. Press the [WINDOW] button to open the HD MIXER SETUP

page.

03. In the 'Record Mix Changes' field, select YES with the [DATA]

wheel. In the ‘Record Track Mute Events’ you can select OFF

or ON to record track mute events or not.

If you set the 'Record mix changes' field to YES and change the LEVEL, SEND,

MUTE, or PAN in the TRKMIX page while recording in SONG mode, the changed

data will be recorded into the song. The song will be played with changing the Level or the Pan as you did during the recording. The mix data

recorded in the song is displayed in STEP EDIT page as follows and you can edit it the same as other MIDI event. These

events are viewed as

LEVEL and PAN events in STEP EDIT Mode.

Note: To record Mixer Automation in HD RECORD Mode, the current song must have at least one sequence assigned.

Erasing HD Track Automation

It is possible to cut or copy Automation, Audio Only, or both from a Track

in HD VIEW. To do so, do the following:

01. In HD RECORD Mode, press the [F4] (HDVIEW) button to open

the HD VIEW Page.

02. Select the track you wish to edit by placing a check in the EDIT

box.

For more information on HD Track editing, see page xxx.

03. Press [F6] (EDIT) to open the AUDIO EDIT page.

04. In the 'Edit' field, select either CUT or COPY

05. In the 'Type' field, select one of the following:

AUDIO+AUTOMATION

Both Audio and Automation will be copied or cut.

AUDIO ONLY

Only audio will be cut / copied.

AUTOMATION ONLY

Only Automation will be cut / copied.

Mixdown

The MPC5000 can mix down songs, including internal sounds, Hard Disk tracks, and effects into a single file. Using this

function, a 16 bit / 44.1 kHz stereo wav mixdown of the current song can be created, ready to burn to CD as your final

master, or you can bounce the tracks to a two track mix in the current song.

Note: only parts assigned to the Main Outputs will be applied to the mixdown. Programs, Effects, and Hard Disk Tracks

assigned to the [ASSIGNABLE MIX OUTS] will not be mixed.

 Mixdown to File

To perform a mixdown of the current song to an audio file, do the

following:

01. Select the RECORD tab by pressing [F2].

02. Press the [WINDOW] button to open the MIXDOWN page.

The page shown on the right will be displayed.

03. In the 'Destination' field, select 'Save as file'.

04. In the Tracks field, you will see the tracks select for mixing

down.

For more information on naming, see page 20.

05. For 'Format', choose 16 or 24-bit.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 221 222

Comments to this Manuals

No comments

Akai MPC5000 Specifications Page 90

Comments to this Manuals

Related products and manuals for Musical Instruments Akai MPC5000