Akai MPC5000 Specifications Page 96

  • Download
  • Add to my manuals
  • Print
  • Page
    / 222
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 95
Functions of a Pad 82
03. Press another pad. For example, press PAD A02
The mute group selection for [PAD02] is selected.
04. Change the selection from OFF to 1.
05. Press [F1] (TkMUTE) to return to the TRACK MUTE page.
06. Play PAD A01
Notice that now PAD A02] mutes along with PAD A01. Up to 16 different mute groups can be created.
Note: When a pad is pressed while holding the [SHIFT] button, the track mute status of only the pressed pad is
changed, and mute group settings are ignored.
Track Mute Quantization
Track and Pad Mutes can be quantized. This will allow Mutes to occur in time with the sequence.
TRACK MUTE Quantization
To turn on Track Mute Quantization, do the following:
01. Press the [TRACK MUTE] Button
This will open the TRACK MUTE Page as shown on the right.
02. Press the [F1] (TkMUTE) button to select the TRACK MUTE Tab.
03. Press the [F5] (T.C.) button.
The [F5] button will darken to indicate it is active as shown to the right.
04. Press a pad corresponding to the Track you would like to mute.
The MPC5000 will mute the selected track on the next division of the T.C.
setting. For more information on setting the TC Value for Track and Pad
Mutes, see the next section.
Changing the Timing Correct for Track Mute Quantization
To change the Timing Correct value while in TRACK or PAD MUTE Mode,
press the [WINDOW] Button. This is separate from the MAIN Timing
Correct, and is used exclusively for Pad / Track Mute. The following
divisions are available:
2 Bar
1 Bar
1/4
1/4(3)
1/8
1/8(3)
1/16
Off
Change Sequences in Track Mute Mode
You have the ability to change sequences when in TRACK MUTE Mode. To
change Sequences in TRACK MUTE Mode, do the following:
01. Press the [TRACK MUTE] Button
This will open the TRACK MUTE Page as shown on the right.
02. Press the [F1] (TkMUTE) button to select the TRACK MUTE Tab.
03. Select the 'SQ' field.
Page view 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 221 222

Comments to this Manuals

No comments