Akai MPC Operator's Manual download pdf (Page 80)

LOOP is set to "OFF" in the PLAY/RECORD screen, additional bars are added to

the end of the sequence as it is recorded past the last bar. This way, the sequence

will continue to add bars as you record, even though the display initially shows

"Bars: 1".

As the screen states, the NOTE VALUE setting in the TIMING

CORRECT screen is forced to "OFF(1/384)" during 16 channel recording.

5. While holding the RECORD key on the MPC60, start the external sequences

playing from the beginning of its sequence. As soon as the MPC60 receives the

sync signals, it will enter RECORD mode and begin recording the data from the

other sequences in real time. Once the transfer is finished, stop the external

sequences and the MPC60 will stop automatically, or manually stop the

MPC60.

NOTE: The OVERDUB key is disabled during this mode.

6. The MPC60 now contains the transferred sequence and may be played using

the PLAY, PLAY START, «, <, LOCATE, >, and » keys. Play the sequence- it

the transfer was successful, press MAIN SCREEN to return to the

PLAY/RECORD screen to edit the sequence as usual. If the transfer didn't come

out as intended, simply try again by repeating step 4 above.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 227 228

No comments

Akai MPC Operator's Manual Page 80