Akai MPC Operator's Manual download pdf (Page 204)

204

9.3 External drum triggering, the midi "drums"

channel

If option 2 is selected from the MIDI screen, the following screen

appears:

This screen has three main sections:

The ASSIGN INCOMING NOTES TO DRUMS section:

In the MPC60, it is possible to play the internal drums from an external

Midi keyboard. This section of the screen is used to assign each of the keys

on the incoming keyboard to one of the 32 internal drums. To turn this

feature on or off, select ON or OFF in the INCOMING NOTES PLAY

DRUMS field. To view or change an assignment, select the desired

incoming midi note in the NOTE field (you can also play a key on the midi

keyboard to set the value), then view or change its drum assignment in the

PLAYS field. The default assignment for all incoming notes is NONE,

except:

NOTE: When playing the internal drums from an external source over

midi, it is possible to either respond to incoming notes on all 16 midi

channels (omni mode) or to respond to incoming notes on the "drums"

channel only (normally channel 16, set in the "midi drums than" field).

Here's how:

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 227 228

No comments

Akai MPC Operator's Manual Page 204