Akai MPC Operator's Manual Page 152

  • Download
  • Add to my manuals
  • Print
  • Page
    / 228
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 151
to 1; to control the decay from a midi keyboard's foot controller, set it to 4.
Normally, this field is set to 20.
• The FUNCTION OF `16 LEVELS' field:
This field is used to determine the function of the front panel 16 LEVELS
key. It is a choice field and has two options: 16 VOLUMES and 16
TUNINGS:
1. : If 16 VOLUMES is selected, the 16 LEVELS key will cause a
single sound to play from all 16 pads, but at 16 fixed dynamic
levels with the softest level on the lower leftmost pad and the
loudest level on the upper rightmost pad.
2. If 16 TUNINGS is selected, the front panel key allows a
specific drum to play at 16 chromatic tunings- one for each of
the 16 pads, from -120 to +30, in increments of 1 semitone.
If this mode is active and the pads are played while recording,
these tunings are remembered within the sequence. After
recording, the tuning of each note may be adjusted in Step
edit mode. This is explained further in the Step edit section of
this document.
NOTE 1: The 16 TUNINGS feature does not operate on the hihat.
NOTE 2: As explained in the section of the manual about sampling, the
MPC60 performs its tuning all digitally without any distortion, but
substantial distortion may be heard if a drum is tuned which was recorded at
too high a level. This new mufti-pitch mode will make it more noticeable on
many of your sounds because it instantly plays the drum at any of 16 tunings.
The only solution to eliminate this distortion is to re-sample the problem
sound at a lower level.
152
Page view 151
1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 227 228

Comments to this Manuals

No comments