Akai MPC Operator's Manual download pdf (Page 167)

Section 7: Saving to / loading from Disk

167

If 1 is selected, the entire file is loaded, and the bottom line changes to

"Loading files...". However, if 2 is selected, the following screen appears:

Use the DATA CONTROL in the SELECT DRUM TO LOAD FROM FILE

field to select the drum (within the SET file) containing the sound you

wish to load. As you change this field, the sound which is assigned to

that drum in the disk file will appear in the SOUND field. Then use the

SELECT DRUM TO LOAD INTO field to select the drum (in the MPC60) to

load the sound into. Once the fields have been set, press <Load it> and

the selected sound will be loaded into the selected drum.

NOTE: If the SET file contains a sound loaded into more than one drum,

the same sound will appear if either drum is selected. For example,

"FLOOR TOM" could be loaded into both TOMS and TOM4, but the

settings from the EDIT A SOUND screen (including tuning, envelope

parameters, etc.) for TOM3 and TOM4 are different. In this case,

selecting TOMS in the SELECT SOUND TO BE LOADED field will load

the sound "FLOOR TOM #3", but with the EDIT A SOUND settings which

were originally set for TOM3.

After the file has been loaded, the LOAD/ERASE/RENAME screen will

be re-displayed.

If a parameter file is selected and <Load it> is pressed, the

following screen will be displayed,

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 227 228

No comments

Akai MPC Operator's Manual Page 167