Akai MPC 60 Operator's Manual download pdf (Page 215)

Chapter 11: MIDI Functions

Page 209

MIDI Input Filter

Selecting option 3 (MIDI input filter) from the MIDI key menu presents the

MIDI Input Filter screen, which allows specific types of MIDI events to be

either received or ignored by the MPC60:

===== Sound Generator Input Filter ====A

MIDI volume:RECEIVE MIDI vol now:127

Prog change:IGNORE

======= Sequencer Input Filter =========

Event:NOTES

Pass event?:YES Min change:5

Velocity mode:NORMAL Fixed veloc: 64

========================================

There are two sections, the Sound Generator Input Filter and the

Sequencer Input Filter. The fields are:

The Sound Generator Input Filter section:

• The MIDI volume field:

This choice field has two options: RECEIVE and IGNORE. If set to

RECEIVE, incoming MIDI volume messages (controller 7) will affect the

sound generator’s overall output volume on all outputs. If set to IGNORE,

incoming MIDI volume messages will be ignored.

• The MIDI vol now field:

This field shows the last value of MIDI volume (controller 7) received. A

value of 127 is normal (no attenuation). Any value less than 127 causes

the volume of all outputs to be attenuated (reduced) from normal. A

VALUE OF ZERO WILL SILENCE ALL AUDIO OUTPUTS EVEN IF ALL

OTHER PARAMETERS ARE SET CORRECTLY!

• The Prog change field:

This choice field has two options: RECEIVE and IGNORE. If set to

RECEIVE, incoming Program Change messages will automatically

select the active program. (Incoming Program Change messages above

program 8 will select program 8.) If set to IGNORE, incoming Program

Change messages will be ignored.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 240 241

No comments

Akai MPC 60 Operator's Manual Page 215