Akai MPC4000 Operator's Manual download pdf (Page 115)

Load page

105

■ Loading an individual sequence

Here’s how to load an individual sequence ﬁle from a storage device into internal mem-

ory.

1. Access the Load page, and move the cursor to the Disk ﬁeld.

2. Turn the [JOG] dial to open the Disk List popup window.

3. Move the cursor to the storage device from which you want to load the

sequence, and press the [F6] key (SELECT).

The load-source storage device will be selected.

4. Move the cursor to the view block, and turn the [JOG] dial to select

SEQUENCE.

5. Move the cursor to the file list block, and select the sequence file that you want

to load.

6. Press the [F6] key (DO IT).

The Load a Sequence popup window will appear.

A Sequence list

Selects the sequence number into which the data will be loaded.

B [F1] key (CLOSE)

Closes the popup window.

C [F5] key (DO IT)

Loads the data.

7. Move the cursor to the sequence number, and turn the [JOG] dial to select the

sequence number (within the MPC4000) into which the selected sequence file

will be loaded.

If you select a sequence number in which events have already been recorded, that data

will be overwritten.

8. To load the data, press the [F5] key (DO IT).

The sequence will be loaded, and the popup window will close.

■ Loading samples

Here’s how to load one or more sample ﬁles from a storage device into internal memory.

1. Access the Load page, and move the cursor to the Disk ﬁeld.

2. Turn the [JOG] dial to open the Disk List popup window.

3. Move the cursor to the storage device from which you want to load data, and

press the [F6] key (SELECT).

The load-source storage device will be selected.

4. Move the cursor to the view block, and turn the [JOG] dial to select SAMPLE.

Only sample ﬁles will be displayed in the ﬁle list block.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 265 266

No comments

Akai MPC4000 Operator's Manual Page 115