Akai MPC4000 Operator's Manual download pdf (Page 90)

MIDI mode

Filter page

Filtering the incoming MIDI events

Here you can ﬁlter out speciﬁc MIDI events that are being input from the [MIDI IN I]

and [MIDI IN II] connectors.

To access this page........[MIDI] key → [F2] key (FILTER)

A MIDI input ﬁlter block

B Event block

Functions

• [F1] key (ROUTING)

Displays the Routing page.

• [F3] key (EVENT)

Displays the Event page.

• [F6] key (PANIC)

Sends All Note Off, Reset All Controllers, Damper Off, and Bend 0 messages from the

MIDI connectors.

MIDI input ﬁlter block

Here you can select the input connector for which you will make settings, and switch the

MIDI ﬁlter on/off.

A MIDI in ﬁeld

Selects either I ([MIDI IN I] connector) or II ([MIDI IN II] connector) as the connector

for which you will make settings. You can make ﬁlter settings independently for each

connector.

B Filter ﬁeld

Switches MIDI ﬁltering on/off for the selected connector.

Input block

Here you can select the type of MIDI event and the MIDI channel to be ﬁltered.

1 2

1 2 3

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 265 266

No comments

Akai MPC4000 Operator's Manual Page 90