Akai MPC 2000XL Operator's Manual download pdf (Page 197)

Chapter 12: MIDI/SYNC Mode, OTHER Mode

Page 186

OTHER MODE

Set the tempo with the TAP TEMPO key and initialize the data. It is also possible to check the

version of the MPC2000XL operating system.

OTHERS Screen

Hold down SHIFT and press OTHER (8 on the numeric pad) to display the OTHER mode screen.

OTHERS

...............................................................................................................

 Tap averaging:3

Display contrastDisplay contrast

 Hold SHIFT and turn jog(anytime)Hold SHIFT and turn jog(anytime)

INIT VER.

• Tap averaging:

Hit TAP TEMPO to set the tempo. The MPC2000XL sets the tempo to the average of the

tempo tapped.

Set the number of taps used to calculate the tempo here.

When this is set to a large value, it is possible to get an accurate tempo. However, this does

not respond to rapid changes in the tempo.

When this is set to a small value, the function will be able to cope with rapid changes in the

tempo, but the inaccuracy of the displayed tempo will increase.

Hold down SHIFT and rotate the DATA wheel to set the contrast of the LCD. It is possible to

change this regardless of the displayed mode.

INIT Screen

Hold down SHIFT and press OTHER (8 on the numeric pad) to display the OTHER mode screen

and press INIT [F2] to display the INIT screen.

Initialize ALL PARAMETERSInitialize ALL PARAMETERS

Pressing DO IT will initialize!!Pressing DO IT will initialize!!

INIT VER.

DO ITOTHERS

Pressing DO IT [F6] erases the parameter data from the MPC2000XL memory and initializes

them to their default parameters.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 207 208

No comments

Akai MPC 2000XL Operator's Manual Page 197