Akai MPC 2000XL Operator's Manual download pdf (Page 196)

Chapter 12: MIDI/SYNC Mode, OTHER Mode

Page 185

MIDI Footswitch Assignment

MIDI Control Change messages sent from the external MIDI devices to the MPC2000XL can

control various functions of the MPC2000XL.

Footswitch Setting

MIDI Footswitch Assignment is set from the MIDI/SYNC mode. Hold down SHIFT and press MIDI/

SYNC (9 on the numeric pad) to display the MIDI/SYNC mode screen and then press MIDIsw

[F3].

MIDIswDUMPSYNC

..............................................................................................................

 Switch 1Switch 1

Ctrl: 10Ctrl: 10

Function:

ODUB/PNCH

 Switch 2Switch 2

Ctrl: 26Ctrl: 26

Function:

ODUB+PLAY

 Switch 3Switch 3

Ctrl: 69Ctrl: 69

Function:

 F6

 Switch 4Switch 4

Ctrl:127

Function:

 PAD 10PAD 10

Here, you can set the MIDI Control Change message to control each switch in the Ctrl: field

and its function in the Function: field.

Note: Each Function is activated when a data value of 64 or more is received. However,

TAP and PAD 01 to 16 will be turned on when the received value is 64 or more, and

turned off when it is less.

The assignable functions are as follows.

PLAY STRT Same function as PLAY START key.

PLAY Same function as PLAY key.

STOP Same function as STOP key.

REC+PLAY Same function as pressing the PLAY key while holding the REC

key down.

ODUB+PLAY Same function as pressing the PLAY key while holding the OVER-

DUB key down.

REC/PUNCH Goes into PLAY from STOP mode, goes into REC (Punch-in) from

PLAY mode or goes into PLAY (Punch-out) from REC mode.

ODUB/PNCH Goes into PLAY from STOP mode, goes into OVERDUB (Punch-

in) from PLAY mode or goes into PLAY (Punch-out) from OVER-

DUB mode.

TAP Same function as TAP TEMPO key.

PAD BANK A to D Same function as PAD BANK A - D keys.

PAD 1 to 16 Simulates the drum pad being pressed at full velocity.

F1 to F6 Same function as the Function key. The function varies according

to the screen displayed at that time.

Note: While recording the sequence, the Control Change messages assigned for this MIDI

Footswitch Assignment will not be recorded. Similarly, the recorded Control Change

messages in the sequence will be ignored during playback.

The MIDI channel to receive these Control Change messages is set in the MIDI Input Window

(select the track type field on the Main Screen - to the right of S: - and press OPEN WINDOW).

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 207 208

Comments to this Manuals

No comments

Akai MPC 2000XL Operator's Manual Page 196

Comments to this Manuals

Related products and manuals for Software Akai MPC 2000XL