Akai CD3000XL Operator's Manual download pdf (Page 226)

LOAD

Page 220 S3000XL Operator’s Manual

LOADING FROM HARD DISK

In the main LOAD page, select the media you wish to load from (i.e. hard disk). You will

see something like this screen:

To select the partition to load from, place the cursor on the partition field and use the

DATA wheel to select the partition. Now move the cursor to the field and select the

volume you wish to load from.

NOTE: You may, if you wish, press F2 - - to see a list of the selected partition

volumes and select a volume to load from:

You may scroll through the list of available volumes on the current partition. If the volumes

have been named, you will see the names of the volumes (otherwise, the volume name

will show VOLUME ??? where ? is the default, unnamed volume number (it is good

practice to name volumes to keep better track of things when loading - see SAVE -

RENAME for information on naming volumes).

When you have selected the one you wish to load from, press F1 - - which will take

you to the main LOAD screen for the selected volume.

In the main LOAD page, move the cursor to the field and use the DATA

wheel to make your selection from the options listed above. Now, either press CLR or

GO as you wish. Pressing (CLEAR) will delete all programs and samples from

memory, and then load the chosen file(s) from disk (BE CAREFUL NOT TO ERASE

ANYTHING YOU WANT TO KEEP THAT HASN’T BEEN SAVED TO DISK!!). You will

receive this prompt to check you want to clear the memory:

You should make the appropriate NO or YES response. Pressing will load the

chosen file(s) into memory without deleting anything first. As the disk is being loaded you

will receive something like the following display to keep you aware of progress:

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 312 313

Akai CD3000XL Operator's Manual Page 226