Akai CD3000XL Operator's Manual download pdf (Page 212)

SAVE

Page 206 S3000XL Operator’s Manual

SAVING TO FLOPPY DISK

In the main SAVE page, select the media you wish to save to (i.e. floppy). You will see

something like this screen:

Now make your selection in the field by moving the cursor to this field

and use the DATA wheel to make your selection. Now, either press WIPE or GO as you

wish. WIPE will first erase the disk completely (BE CAREFUL!!) and then save the file(s).

You will receive the following prompt:

You should press F7 or F8 as appropriate.

GO will simply save the file(s) without erasing the disk first.

If no floppy disk is in the drive, you will be prompted accordingly. Similarly, if the floppy

disk is write protected, the S3000XL will inform you.

NOTES ABOUT SAVING TO FLOPPY DISK

An unexpanded S3000XL is capable of holding more data than will fit onto a single

MF2DD or MF2HD disk. If you try to save an entire volume with many programs and

samples, you will have to use more than one disk. However, the S3000XL will prompt you

accordingly, prompting you to insert new disks as necessary.

You cannot save continuous samples across more than one floppy disk. For example, if

you have a 24 second sample and try to save it, it cannot store part of that sample on

one disk and part on another. If you are using long samples like this, we recommend you

invest in a hard disk.

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 312 313

No comments

Akai CD3000XL Operator's Manual Page 212