EDIT PROGRAM - SINGLE
S3000XL Operator’s Manual Page 109
THE TONE PAGE
If the IB304F is fitted, the S3000XL also features a simple tone control which is accessed
via F8 - . Pressing this will display this screen:
The TONE section can best be described as ‘spectral tilt’. If you imagine a see-saw, the
bench is the parameter and the fulcrum over which it rocks is the
parameter. For example, when the controls are set as shown in the
above screen diagram, the response would be flat but with a setting of 50 for the centre
frequency parameter and +50 for the slope parameter, you would have a response graph
something like this:
L
E
V
E
L
FREQUENCY
+
-
CENTRE FREQUENCY
CENTRE FREQUENCY=50 SLOPE=+50
Here, bass frequencies are attenuated whilst high frequencies are boosted. Setting the
parameter to -50 would reverse the angle, cutting high frequencies and boosting
LF.
By setting the lower, you may create a tone response something like this:
L
E
V
E
L
FREQUENCY
+
-
CENTRE FREQUENCY
CENTRE FREQUENCY=25 SLOPE=+50
Here, some bass frequencies are cut but some mid and a lot of high frequencies are
boosted.
Comments to this Manuals