Akai CD3000XL Operator's Manual download pdf (Page 181)

EFFECTS EDIT

S3000XL Operator’s Manual Page 175

Pressing in any of the effects pages will give you access to the EQ functions. The

EQ section of the two multi-effects channels is a four band EQ offering lowpass control

over a low frequency, two bandpass mid frequencies and a highpass high frequency

control. I.e.:

BP1

BP2

GAIN

You may set the centre frequency and the gain for each of the four channels (on the two

mid frequency ranges, you may also set the width of the EQ effect).

FREQUENCY

LOW BP1 BP2 HI

The frequency of each of the four bands is variable and may overlap if you wish and you

may selectively boost these frequencies if you wish to enhance certain aspects of the

sound. Furthermore, you can modulate the frequencies of either of the two mid range

sections to create auto-wah effects such as you find on a wah-wah pedal. It is also

possible to create synthesiser filter sweep effects.

The EQ screen looks something like this:

The parameters are:

This sets the centre frequency for the four bands of EQ, LOW, MID1,

MID2 and HIGH. For Khz frequencies, the field is expressed as

Hz. For

example, a setting of 6k3Hz represents a setting of 6.3kHz. You will note

that the values for these fields cannot be set using the numeric keypad.

Only the DATA control may be used.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 312 313

No comments

Akai CD3000XL Operator's Manual Page 181