Akai MPC Operator's Manual download pdf (Page 116)

MPC2500 Operator’s Manual rev 1.0

106

Chapter 16: Save / Load

Saving all the data in the memory at the

same time

You can save sample/program/ALL files at the same time.

When you save the data, a project file will be saved, as

well as a sample, program and ALL files. The project file

does not have actual sample or sequence data, but it has

the information about the sample/program/ALL files

that are saved when you save the data. When you load the

project file, the sample/program/ALL files saved with

the project file will be loaded automatically and set the

MPC2500 to the same status when you saved the data.

For example, if you select SAVE ENTIRE MEMORY when

you save the data after finish working on it for the day,

you can start the MPC2500, the next day, from where you

finished the previous day.

01. In the To field of the SAVE page, select the destina-

tion folder.

02. In the Type field, select SAVE ENTIRE MEMORY.

03. Press the [F6] (DO IT) key.

The Save Entire Memory window will be displayed.

04. In the Project name field, select the name of the

project file to save.

05. In the Replace same files field, set how to handle the

file when you already have the data with the same

name as the loading file in the unit.

NO The MPC2500 will not save the file with the

same name.

YES The MPC2500 will overwrite the data by

with new file.

06. Press the [F5] (DO IT) key.

The MPC2500 will start saving the data.

About Input Thru (.IPT) file

If you use “SAVE ENTIRE MEMORY” to save the Internal

memory data, the Input thru file will be saved with the Project

file. The Input Thru file contains the setting of the Input Thru in

the MPC2500. When you load the Project file, the Input Thru

file will be loaded automatically with the Project file. You can also

load only the Input Thru file (IPT File) in the Load page.

Creating the Autoload folder

When you create an AUTOLOAD folder on the memory

card, the MPC2500 will load the contents of the

AUTOLOAD folder automatically when you switch on

the unit with the memory card in the card slot. You can

load the most frequently used drum set program or

sequence data automatically.

01. In the Type field, select SAVE ENTIRE MEMORY.

AUTOLOAD folder will be created in the ROOT

folder, which is located at the top directory, so you

do not have to select the destination folder.

02. Press the [F6] (DO IT) key.

The Save Entire Memory window will be displayed.

03. Press the [F2] (A.LOAD) key.

The Save Auto load File window will be displayed.

04. Press the [F5] (DO IT) key.

The MPC2500 will create the AUTO LOAD folder in

the ROOT folder and save all the data in that folder.

If the ROOT folder already has the AUTOLOAD

folder, the Autoload Folder Exists window will be

displayed.

To replace the current AUTO LOAD folder with a

new one, press the [F2] (REPLAC) key. In this case,

the contents of the current AUTOLOAD folder will

be deleted.

To keep the current AUTOLOAD folder, press the

[F4] (CANCEL) key to cancel the operation, go to

the Directory folder and change the name of the cur-

rent AUTOLOAD folder.

Saving data to the internal

hard disk (option)

You can save data to the internal hard disk drive (option) as

well as the memory card, if the internal hard disk is installed

to the MPC2500. When you save the data to the internal

hard disk, select HARD DISK, instead of MEMORY CARD,

in the Save to field as in procedure “02” Saving data. The

other procedure is sama as Saving the data to memory card.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 135 136

Akai MPC Operator's Manual Page 116

Comments to this Manuals

Akai MPC Operator's Manual Page 116

Comments to this Manuals

Related products and manuals for Recording Equipment Akai MPC