Akai ACA10 User Manual download pdf (Page 6)

ISO Cable Connection3.1

1357

2468

ISO A CONNECTOR

Depending on the manufacturer, the contacts on your vehicle

connection may be assigned differently. This is not a defect of the

device but caused by a deviating connector pin assignment by the

manufacturer of your vehicle. To provide a connection that

conforms to this device, please purchase an appropriate adapter

cable from a specialized dealer if required. Please consult a

specialist in your area if you have any questions about the

connections.

A4 YELLOW (B+): Connection for +12V operational voltage (diameter at

least 2.5 mm) to permanent plus of the vehicle.

A5 BLUE: To system control terminal of an external amplier or Automatic

Antenna (max. 100mA / 12V

A7 RED ACC (+): Connection for +12V trigger voltage. Connect to ignition

key of the vehicle. If contacts A4 and A7 are switched, the device will

"forget" the stored stations after the ignition is turned off.

A8 GND (- /Ground): Attach the connection for the ground (diameter at least

2.5 mm) to the ground of the vehicle.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Akai ACA10 User Manual Page 6