Akai ACA10 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
!
CAUTION
Do not insert the control panel from the right side. It can damage the
control panel.
This control panel is not waterproof. Do not expose it to water or excessive
moisture.
Do not place the control panel on the dashboard or nearby areas where the
temperature rises high. Instead, keep the control panel in the protective
carrying case.
To avoid damaging the control panel, do not push it down or place objects
on it while it is open.
The rear connector that connects the main unit and the control panel is an
extremely important part. Be careful not to damage it by pressing on it
with ngernails, pens, screwdrivers, etc. Do not touch the contacts on the
control panel and the main unit, since this may result in poor electrical
contact. If dirt or other foreign substances get on the contacts, wipe them
off with a clean and dry cloth.
General functions5.2
To switch on the appliance, press the POWER button (1). To switch off the
appliance, press the POWER button (1) again.
To select the source mode (AUX, TUNER, MP3, USB, SD, MMC), press
the MD button (4).
To adjust the volume level, turn the VOLUME dial (13) until the desired
level is set.
To mute or restore sound, press the MU button (5).
To activate the loudness: Press and hold the LD button (6) for more than
2 seconds.
To access the BASS control, press the SELECT button (13) once.
To adjust the level, turn the VOLUME dial (13) until the desired level is set.
To access the TREBLE control, press the SELECT button (13) once
again. To adjust the level, turn the VOLUME dial (13) until the desired
level is set.
To access the BALANCE control, press the SELECT button (13) once
again. To adjust the level, turn the VOLUME dial (13) until the desired
level is set.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments