Akai ACA10 User Manual download pdf (Page 5)

ACA10

Installation3.

This unit can be installed in any dashboard having an opening as shown in

the picture. The dashboard should be 4.75 - 5.56 mm thick in order to be

able to support the unit. The unit should be installed horizontally in an angle

less than 20°.

First complete the electrical connections, and then check them for

correctness.

● Remove the outer edge from the unit.

● Remove the detachable control panel.

● Insert the release keys to separate the unit from

the mounting bracket. Keep the release keys in

a safe place for future use.

● If necessary, attach the support strap to the car

body using the tapping screw.

● Insert the mounting bracket into the dashboard,

and bend the mounting tabs out with a

screwdriver.

● Secure the rear of the unit to the support strap,

using the bolts, nuts, and washers provided.

● Connect the appliance to the electrical circuit.

Read the paragraph "ISO Cable Connection".

● Connect the random equipment to the

appliance. Read the paragraph "Connecting

random equipment".

● Push the main unit into the mounting bracket

until you hear a click.

● Press the RESET button.

● Attach the control panel. Read the paragraph

"Detachable control panel" in the chapter

"Operation".

182mm

53mm

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Akai ACA10 User Manual Page 5