Akai MFC42 Operator's Manual download pdf (Page 27)

Chapter 4 MIDI Function

MIDI CLOCK SYNC 88 (Undefined) OFF=0, ON=127

BEAT 89 (Undefined)

=1, =3, =5, =7, =9, =11

- 3 - 89 (Undefined)

=2, =4,

TRIGGER 85 (Undefined) OFF=0, ON=127

ENVELOPE 84 (Portamento Control) OFF=0, ON=127

LFO 82 (General Purpose Controllers 7) OFF=0, ON=127

WAVE 83 (General Purpose Controllers 8) Triangle=0, Sawtooth=1, Square=2, Random=3

CUTOFF 86 (Undefined) OFF=0, ON=127

RESO 87 (Undefined) OFF=0, ON=127

POLE (MONO)

76 (Sound controllers 7) OFF=0, 2 POLE=1, 4 POLE=2, 8 POLE=3

POLE (STEREO)

77 (Sound controllers 8) OFF=0, 2 POLE=1, 4 POLE=2

LINK 80 (General Purpose Controllers 5) OFF=0, ON=127

INVERT 81 (General Purpose Controllers 6) OFF=0, ON=127

PHASE SHIFTER 92 (Effects 2 Depth, Tremolo Depth) OFF=0, ON=127

DISTORTION 93 (Effects 3 Depth, Chorus Depth) OFF=0, ON=127

16 (General Purpose Controllers 1) Tempo 30-300. MSB byte (7-75)

48 (General Purpose Controllers 1 LSB) Tempo 30-300. LSB byte (0,32,64,96)

FILTER TYPE (MONO) 78 (Sound controllers 9) LOW PASS=0, NOTCH=1, HIGH PASS=2, BAND PASS=3

FILTER TYPE (STEREO) 79 (Sound controllers 10) LOW PASS=0, NOTCH=1, HIGH PASS=2, BAND PASS=3

DESTINATION 91 (Effects 1 Depth, EXT EFF Depth) Mono=0, Stereo=127

RATE 24 (Undefined) 0-127(min-max)

DEPTH 23 (Undefined) 0-127(min-max)

A 49 (General Purpose Controllers 2 LSB) 0-127(min-max)

D 50 (General Purpose Controllers 3 LSB) 0-127(min-max)

S 51 (General Purpose Controllers 4 LSB) 0-127(min-max)

R 52 (LSB for Control Change 20) 0-127(min-max)

L-R PHASE 25 (Undefined) 0-127(0-180)

CUTOFF (MONO)

17 (General Purpose Controllers 2) 0-127(Lo-Hi)

CUTOFF (STEREO)

18 (General Purpose Controllers 3) 0-127(Lo-Hi)

RESONANCE (MONO)

19 (General Purpose Controllers 4) 0-127(min-max)

RESONANCE (STEREO)

20 (Undefined) 0-127(min-max)

LEVEL (MONO)

21 (Undefined) 0-127(min-max)

LEVEL (STEREO)

22 (Undefined) 0-127(min-max)

PAN 26 (Undefined) 0-64-127(L-C-R)

SPEED (PHASE SHIFTER)

53 (LSB for Control Change 21) 0-127(min-max)

DEPTH (PHASE SHIFTER)

54 (LSB for Control Change 22) 0-127(min-max)

OUTPUT (DISTORTION)

55 (LSB for Control Change 23) 0-127(min-max)

Key/Switch

MIDI Control Change Number Table

Knob

TAP TEMPO

=0,

=6,

=8,

=10

Sending the settings via MIDI

The settings (of all keys and knobs) of the MFC42 can be sent out in one go via MIDI. This is called the

Send Scene function.

By connecting the MIDI sequencer, the settings can be recorded and recalled.

Recording

Set the MIDI channel of the recording track on the external sequencer and that of the MFC42 to the same

channel. Next, start recording the sequencer. Then, press the + and - keys at the same time. The settings

of MFC42 will be sent out via MIDI and recorded by the sequencer (approximately 2 seconds). The LED

displays “Sen” while the data is being sent.

Playback the recorded sequence. The settings of MFC42 will be recalled as it receives the MIDI Control

Change messages.

Using these MIDI functions above, replay of the song can be made by recording the MFC42 settings to the

beginning of the sequence and further recording the operation of keys and knobs on to the sequence track.

Also refer to Connection of MPC2000/MPC2000XL in Chapter 5.

Note: It is recommended to use the auto-tuning function, before each recording and playback, for more

accurate reproducibility (see Chapter 2 Auto-tuning).

The names in parenthesis are as in MIDI specifications.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Akai MFC42 Operator's Manual Page 27

Comments to this Manuals

Related products and manuals for DJ controllers Akai MFC42