Akai MFC42 Operator's Manual download pdf (Page 11)

Chapter 1 Introduction

12. A knob

Sets the attack time of envelope.

13. D knob

Sets the decay time of envelope.

14. S knob

Sets the sustain level of envelope.

15. R knob

Sets the release time of envelope.

16. ENVELOPE key

The BEAT Module triggers the envelope for cut-off/resonance cyclically when it’s ON (key is lit

while ON).

17. LFO key

The BEAT Module applies the LFO of constant speed to cut-off/resonance when it’s ON (key is

lit while ON).

18. WAVE key

Selects the waveform for LFO from 4 waveforms of Triangle, Square, Sawtooth and Random. The

key press toggles the waveform selected. The LED of selected waveform is lit.

19. CUTOFF key

The cut-off is controlled by the Groove Modulator or Manual Trigger when ON (LED is lit while

ON). It can be used with RESO key.

20. RESO key

The resonance is controlled by the Groove Modulator or Manual Trigger when ON (LED is lit while

ON). It can be used with the CUTOFF key.

21. DEPTH knob

Sets the depth of LFO waveform/amount of envelope change that controls cut-off/resonance.

The larger the LFO waveform/Envelope, the more the changes.

22. DESTINATION switch

Selects the destination of Groove Modulator/Manual Trigger to either Mono or Stereo channel to

control its cut-off/resonance.

23. L-R PHASE knob

Adjusts the phase difference of LFO waveform between Left and Right channels (Stereo channel

only).

24. INPUT knobs (Mono/Stereo channels)

Adjusts the input level. This adjusts the signal level introduced to the filter module.

25. 2 POLE keys (Mono/Stereo channels)

Turns 2-pole filter on/off (key is lit while ON).

26. 4 POLE keys (Mono/Stereo channels)

Turns 4-pole filter on/off (key is lit while ON).

27. 8 POLE key (Mono channel only)

Turns 8-pole filter on/off (key is lit while ON).

28. FILTER TYPE switches (Mono/Stereo channels)

Selects the filter type from High pass, Low pass, Band pass and Notch type ( designates up

and

designates down position).

29. CUTOFF knobs (Mono/Stereo channels)

Adjusts the cut-off frequency of filter. The sound changes with the rotation of knob.

30. RESONANCE knobs (Mono/Stereo channels)

Adjusts the resonance of filter. Gives sound the distinguishable character. It even oscillates when

the knob is turned up too high.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Comments to this Manuals

No comments

Akai MFC42 Operator's Manual Page 11

Comments to this Manuals

Related products and manuals for DJ controllers Akai MFC42