Akai max49 User Manual download pdf (Page 6)

REAR PANEL OVERVIEW

1. POWER INPUT – Connect an

optional 6V DC – 2A power adapter

(center pin positive, sold separately)

to this jack then into an electrical

outlet.

2. POWER ADAPTER RESTRAINT – You can secure a power adapter cable to this restraint to prevent it

from accidentally unplugging.

3. KENSINGTON LOCK SLOT – You may use this Kensington lock slot to secure MAX49 to a table or

other surface.

4. USB PORT – Use the included USB cable to connect this port to the USB port of your computer.

MAX49 will be powered by your computer's USB connection. MAX49 is class-compliant, so it is "plug-

and-play" – no separate driver installation is necessary.

5. MIDI OUT – Use a five-pin MIDI cable to connect the MIDI OUT of MAX49 to the MIDI IN of an optional

external device.

6. MIDI IN – Use a five-pin MIDI cable to connect the MIDI OUT of an optional external MIDI device to the

MIDI IN of MAX49.

7. EXPRESSION PEDAL INPUT – Connect an optional 1/4" TRS expression pedal to this input.

8. FOOTSWITCH INPUTS – Connect an optional 1/4" TS footswitch to these inputs. If you are using a

sustain pedal, connect it to the FS1/SUSTAIN input.

9. CV OUT – Use a 1/4" TS cable (not included) to connect this output to an optional external sequencer

to send MAX49's control voltage (CV) data (0-5V, 1V/octave). The data sent over this connection can

be set in Global Mode. Please also see the CV section of this manual.

10. GATE OUT – Use a 1/4" TS cable (not included) to connect this output to an optional external

sequencer to send MAX49's Gate (trigger) data. The data sent over this connection can be set in

Global Mode.

MODES

MAX49 has four different modes of operation. Each

mode can be accessed by pressing the

corresponding button on MAX49.

In each page of each mode:

• Use the up/down CURSOR BUTTONS to move between settings on the current page.

• Use the left/right CURSOR BUTTONS to move between different pages.

• Turn the VALUE DIAL to change the currently selected value/setting.

Following is a short description of each mode. Each mode is described in detail in its corresponding section

later in this manual.

[EDIT]  Edit Mode: This mode allows you to edit the configuration of MAX49. Edit Mode is a powerful tool

for customizing your set-up. In this mode, you can make changes to how the keyboard, pads, touch faders

and other features behave. For example, you may want a touch fader to transmit only a limited range of MIDI

data, or you may want the pads to transmit on a different MIDI channel from the keyboard. You can change

these and other various parameters in Edit Mode. (See the EDIT MODE PARAMETERS section for a

summarized list of parameters.)

[PROGRAM]  Program Mode: This mode allows you to load your stored Programs. A Program is a

collection of information about how the controls – keyboard, pads, touch faders, etc. – will behave (their

behavior can be adjusted in Edit Mode then stored). Using Programs allows you to save different

configurations, which can be quickly loaded when you need them, without having to reprogram MAX49 every

time.

[GLOBAL]  Global Mode: This mode allows you to set global parameters and make general changes to

how MAX49 functions. For example, you can set the brightness of the LCD screen, the MIDI common

channel, MIDI clock settings, the pads' and keyboard's velocity curve and sensitivity, and more.

[PROG CHANGE]  Program Change Mode: This mode allows you to transmit various Program Change

messages. In this mode, you can make your DAW or external device switch to a different program bank of

sounds. This way, you can switch between programs right from MAX49 rather than switching them manually

on your DAW or external device.

788

910

1 2 3 4 5 6 7 8 9 10 11 ... 87 88

Comments to this Manuals

No comments

Akai max49 User Manual Page 6

Comments to this Manuals

Related products and manuals for Audio accessories Akai max49